Valuable insights are provided
so you can make qualified decisions
WHY USE OUR SEEDING LINE
The difficulties overcome by mechanical planting of hole tray seedlings: Most vegetable seedlings in INTERNATIONAL are raised using hole tray seedlings. Artificial soil covering is relatively cumbersome, requiring.
The substrate must have a depth of at least 5mm in order for gravity to act, causing water in the substrate to seep down. The deeper the air enters the pores, the higher the oxygen content. The shape of the hole should be a square inverted trapezoid, which is conducive to guiding the root system to extend downwards, rather than the root system winding around the inner wall like in circular or vertical holes on the side. Deeper pores provide more favorable conditions for drainage and breathability of the matrix.
HOW TO WORK
Serious workload, insufficient manual accuracy during the on-demand process.
Hole tray seedling cultivation process: covering soil, scraping flat, pressing holes, sowing, covering soil, scraping flat (material cylinder capacity: 130L substrate soil)
Cover soil: After placing the conveyor belt on the tray, the system notifies the machine to lower the soil through sensors. Transport the conveyor belt to the corresponding location for processing
Cover with soil. (The thickness of the soil cover is adjusted through a baffle.)
Scraping: Simple scraping
Acupoint punching: After the corresponding sensor senses the hole tray, the punching device starts punching, making it convenient for later planting. The depth of punching can be adjusted according to the air
Adjust the height of the cylinder.
On demand: The sensor detects the hole tray and begins to play on demand,
Secondary soil cover: After sowing, continue to move forward and carry out secondary substrate soil cover.
Scrape flat.
PRODUCT DETAILS
Double row rocker arm type
Double single row: both limited position poles. The tray position will not deviate.
Double row: Short travel and fast speed.
Cabbage, chili seed. Suitable for absorbing small seeds, fast speed
It has a screen, induction control, and built-in induction system. It is also suitable for foam disk, but it can't sense, and can only rely on the analog system model
Simulate the number of holes, width, and length to match the speed to achieve the on-demand process.
| Double row hole tray seedling production line |
| Sizes |
490*100*140(cm) |
| Weights |
500KG |
| Motor |
Conveyor belts, Filling machine, brushes(6) |
|
Power |
650w |
| Voltage |
220v |
| Sensor |
Filling machine, hole-pressing, spot seeding1, spot seeding2,secondary back filling machine |
| Construction |
Filling machine, seeding sowing machine, secondary back filling machine |
| Scope of application |
Peppers, tomatoes, Onions, carrots, cabbage, watermelon, flowersPeppers, tomatoes,
Onions, carrots, cabbage, watermelon, flowers |
PRODUCT PARAMETER
Sensors: There are four groups in total. (Soil cover machine, hole pressing, spot seeding, secondary soil cover)
Single row hole tray seedling cultivation consists of three parts, simple and easy to operate. Can be disassembled or combined.
Topping machine, broadcasting machine, and secondary soil covering machine.
Motor distribution: 3 conveyor belts (120w/piece), 2 bulldozers (120w/piece), 1 brush/roller brush (25w/piece).
Double row assembly line (detachable and combinable) 2BP-510: 490 * 100 * 140 (cm) Weight: 500 kilograms
Contrast sensors: (5 sets) (covering soil, pressing holes, spot broadcasting 1, spot broadcasting 2, secondary soil covering)
Construction: detachable and composable; Three parts: soil covering machine, broadcasting machine, and secondary soil covering machine;
Double row on-demand player:2BP-510: 210 * 105 * 105 (cm);
Weight: 150 kilograms
Motor: 1 (conveyor belt), total power 120w
Opposing sensors: 3 sets (pressing hole, on-demand 1, on-demand 2)
Basic component components:
Material: The whole machine is composed of high-strength aluminum and stainless steel.
Dual row central processing unit: Mitsubishi Electric's customized industrial computer (precise, easy to control, and compatible); Operation mode: touch sensitive
The dual row PLC display adopts the customized version of "Xinjie";
Sensor: Panasonic;
Dual exhaust components: imported SMC (Japan)
The double row adopts a combination of universal wheels and lifting support feet, making it easy to move.
3. Applicable hole plate:
Double row hole disc outer diameter size (cm): plastic disc consistent with single row 54 * 28 * (4-6), float disc (customizable);
4. On demand mode:
Double row on-demand: Rocker arm on-demand method, 1-6 pills/hole (needle replacement); Single row on-demand, dual row simultaneous on-demand, and interval broadcasting
Fast on-demand playback;
Efficiency: 600-1000 discs/hour
Accuracy of 98%, hole rate: (1-2%)
WORKING PRINCIPLE
By using a vacuum generator, the positive pressure is changed to negative pressure, and negative pressure is used for seed suction and seed drop (the suction pressure and release pressure can be adjusted)
The whole machine adopts a full motor design, with 6 independent motors controlled separately, each motor with a speed controller (where is it broken)
Where to repair it.
ADVANTAGES OF HOLE TYRAY SEEDING LINE
The benefits of hole tray seedling cultivation?
1.Facilitate centralized management, save costs and labor;
2.Developed root system and high survival rate after transplantation;
3.Shortening the growth cycle can lead to early listing and seize market opportunities.
4.The upward trend is even and there is no slowing down period.
Not only can national standard plastic hole trays be used, but also float trays can be used to achieve various seedling cultivation methods.
Pre-sale:
1. Suggest to client suitable raw material, final product capacity.
2. Introduce machine's structure and features in detail, explain the price component.
3. answer client concerned questions.
1.Waterproof packing with the international export standard by 20ft, 40ft, 40hp container.
2. Equipment Fittings, Electric Motor and Power Cabinet will be packed in Wooden Case or Iron Box. Other equipment will be packed by Color-Stripes Plastic Cloth.
3. Or as per customer's requirements.
After sale:
1. Start production as soon as receiving down payment.
2. Send photos of machine in manufacturing and finished photos to client, for your better learn about the machine's condition.
3. Delivery machine in time, taking photos during loading, so you can "remote monitoring" your goods.
4. Documents and certificate available in time.
5. Manual documents available. Engineer can be sent to client site for installation instruction.
){kind=link}