one capsule in one hole seed-growing machine for large-scale cultivation
Summary of advantages
1 The whole assembly line is composed of three parts, the middle seeder, the front and back two soil covering machines, which can be split and combined.
2.There are 6 steps to work: soil covering/scraping/rolling brush/pressing hole/on demand/secondary soil covering
3.The whole machine is provided with support feet, convenient leveling, and universal wheel, easy to move and carry
4. The whole assembly line is configured with Mitsubishi's big brand processor, Shun Jet's display, SMC's imported pneumatic parts, Panasonic's sensor, and refined motors. All parts/pneumatic components are the best available on the market.
5.The 7-inch display is operated intelligently, which can monitor the working status of the pipeline in real time, and switch the on-demand mode according to demand
6. Five groups of laser sensors make the accuracy up to 98%, through infrared induction can achieve no disc no soil cover, no disc no seeding, no holes
7. Patent: I love invention column on CCTV on 23.6.14, and we are an enterprise that has passed the national agricultural machinery appraisal, and obtained the agricultural machinery appraisal certificate
On-demand sowing method: pull rod on-demand, short running distance, suitable for large seed, efficiency 400-600/h
Working principle: suction principle, negative pressure suction, positive pressure drop
The size of the hole plate is generally 54 cm ×28 cm, and the specifications are 50 points, 72 points, 105 points, 128 points, 162 points, 200 points and so on
Pepper/tomato/eggplant/green onion/onion/leek
Cabbage/kale/broccoli/celery/lettuce
Cucumber/melon/cantaloupe/watermelon/pumpkin
| Speed |
400-600 trays/hour |
| Trays Cells |
50/72/105/128/162/200 |
| Trays type |
white tray, the black tray |
| Machine Size |
430*90*130cm |
| Seed Size |
0.2-12 mm |
| Seedling Rate |
98% for round, 95% for others |
| Operater |
2 Persons |
If you want to use this line to complete the seedling work, 6 steps are completely done
First cover: Put the soil needed for growing seedlings into the cover machine. Note: The seedling soil should be made of yellow soil or orchard soil with good porosity, fertility and moderate weak acidity, mixed with molecular soil and organic fertilizer
Scraping: The matrix soil in the hole tray is not smooth, we need this process to make the surface smooth
Rolling brush: This step is to roll the dirt on the surface of the tray to make it fall off and the surface becomes clean
Pressure hole: Press the matrix soil in each hole to create a pit
Sowing on demand: Put the seeds into the hole tray
Secondary soil covering: the surface of each hole in the hole tray is attached to a layer of matrix soil
Requirements for the use of seedling tray:
First of all, the use of seedling tray should pay attention to the temperature of the environment. Temperature has always played a decisive role in the growth of plants. Different plants choose different temperatures differently. Therefore, when using, be sure to change the temperature according to the selected plant. In this way, we can ensure that the seedling tray plays a corresponding role.
Secondly, in the matrix of the seedling tray, corresponding checks also need to be carried out. First, make sure it's insect-free. Because if there are bugs in the substrate, there will be problems in the future planting. And it must not be fertilized, so that it can retain its original effect.
Therefore, we must pay attention to the above requirements when using the seedling tray to avoid going wrong again.
Introduction of water problem in daily use of cavity plate
In the process of seedling production, the most important operation is water management. However, in the actual process of operation, it is often done by people with little experience. At the wrong time may use the wrong way to sprinkle water, will seriously affect the production of pot seedling.
Definitely do not allow the pot pan seedlings to be completely boring; Conversely, the water in the substrate is too full, which will form root hypoxia (0-2%).
The water production management of pot plate seedlings generally takes the opening of cotyledon as the dividing line.
The water management before the opening of the cotyledon is relatively simple, that is, the lower part of the hole matrix must always adhere to wet. Just control the dry and wet replacement of the matrix in the upper half of the hole.
After the opening of the cotyledon, the lower part of the hole matrix should be controlled to see dry or wet according to the change of environment and plant growth. You can dig up a portion of the substrate before sprinkling water and investigate whether the lower part has a certain humidity. Of course, it is a more ambitious test method to measure the weight of the hole plate and determine the humidity of the matrix. The condition is that you must have experience knowing the weight of the cave plate at different humidity levels. You can also lift the tray to see if the substrate at the bottom of the tray dries out to determine whether to make up for the water. After sprinkling water, let 10% of the water seep out of the hole tray, you can enter the wet cycle. When fattening or filling, it must be poured thoroughly. When pouring water, just pour until the water flows through the pan.
Water in the matrix is lost through transpiration and water absorption by the roots. The former has the primary effect before the opening of the cotyledon. After the cotyledon is opened, the root, dominated by transpiration, plays the primary role in water absorption. So at this time, we have to determine how to sprinkle water according to the impact of environmental climate changes on the transpiration effect of plants.
FAQ
What is the MOQ of your products?
1 unit.
What is our warranty?
1 year.Spare Parts -For easy-damage parts, we will send you together with the machinery for free.And in the warranty period, if the spare part doesn't work because of the quality, we will send you new parts for free
I'd like to know your Payment way?
T/T. 30% deposits, 70% balance before delivery.
How about the Delivery time?
About 15 days after receipt of deposit,The specific delivery time depends on the items and the quantity of your order.
Can I get Discount from buying your goods?
The price depends on the quantity, we'll automatically making discount to our customer.
Can you satisfy my special requirement?
Definitely! We are direct manufacturer and we have strong producing capacity and R&D capacity
){kind=link}